How Important Is a Lesser Metatarsal Osteotomy in Preventing Second Hammertoe Recurrence?

Hammertoes with greater preoperative transverse plane deformity are more likely to recur after corrective surgery; however, it is unclear whether this represents an inherent (fixed, nonmodifiable) risk, or whether steps can be taken intraoperatively to mitigate this risk. In this study, we examined whether transverse plane transposition and/or shortening of the second metatarsal during second hammertoe surgery influenced recurrence. We performed a secondary analysis of pre-existing data from patients that had previously undergone second hammertoe surgery at our institution between January 1, 2011 and December 31, 2013. One hundred two patients (137 toes) were followed for a mean 28 ± 7.8 months postoperatively. Thirty-seven toes required, at the surgeon's discretion, an additional/concomitant Weil metatarsal osteotomy. Magnitude of transverse plane transposition and shortening of the second metatarsal, and joint angular measurements were obtained from the second metatarsophalangeal joint on weightbearing AP radiographs preoperatively and at 6 to 10 weeks postoperatively. Cox regression analysis was used to identify predictors of hammertoe recurrence using these new variables and a set of known predictors. In the final regression model, failure to establish a satisfactory postoperative metatarsal parabola (i.e., long second metatarsal; Nilsonne values <-4 mm, multivariate hazards ratio [HR] 1.96, p = .097), and intraoperative lateral transposition of the metatarsal head (multivariate HR 3.45, p = .028) seemed to confer additional risk for hammertoe recurrence. We conclude that shortening osteotomies may be assistive in some individuals, while further inquiry is still needed to determine whether similar benefits can be derived from medial head transposition in medial toe deformities.

The use of an Intra-medullary fusion system in hammer toe surgery; mid-term follow-up.

Objectives: To assess the efficacy of a new hammer-toe locking fusion system. METHODS: The retrospective study was conducted at Kutahya Evliya Çelebi Education and Research Hospital, and comprised data from March 2014 to January 2017 of patients of either gender with hammer toe deformity. The American Orthopaedic Foot and Ankle Society and visual analogue scale scoring systems were used. Radiological evaluation was also used to determine the lateral interphalangeal angle measurements. All patients were subjected to hammer toe surgery using new two-block interlocking fusion system, and were followed up for about 2 years. SPSS 25.0 for windows was used for analysis. RESULTS: According to gender, 13(65%) of patients were female and 7(35%) of patients were male. The overall mean age was 51.5±16.31 years (range: 20-72 years). Of all the surgeries, 9(45%) were performed on the right foot, and 11(55%) on the left foot. The follow-ups ranged 21-32 months. Compared to baselines values, American Orthopaedic Foot and Ankle Society scale and visual analogue scale scores significantly improved post intervention (p<0.05). CONCLUSIONS: Significantly favourable outcomes were noted, indicating the efficacy of the fusion process.

Novel Extramedullary Fixation Device for Hammertoe Correction: A Retrospective Review of 100 patients.

Classically, one of the more common treatment options for rigid hammertoe correction consists of end-to-end arthrodesis stabilized by temporary Kirschner wire (K-wire) fixation maintained until osseous consolidation or complication necessitating premature removal. However, single K-wire fixation allows for axial rotation which results in loss of compression at the arthrodesis site. To counteract this, intramedullary implants were designed to provide fusion site stability in all planes negating extra-skeletal extension of the wire. Nevertheless, manual pressfit implants arguably offer less reliable positioning of the fusion site in a true end to end orientation due to variation in intramedullary stem placement compared to direct visualization with dorsal plating. Larger diameter implants create an osseous void at the bony interface reducing the potential of true bony union. Hammertoe implant failure poses a unique and challenging salvage scenario which can ultimately end in amputation. Extramedullary fixation is uniquely designed to merge both benefits of K-wires and intramedullary implants while eliminating inadequacies of each. A total of 100 patients who underwent 150 rigid hammertoe corrections with an extramedullary implant were retrospectively reviewed. The mean postoperative follow-up was 12.6 months (range 12-18 months). Overall, 94 of 100 patients (94%) achieved radiographic union, defined by 2 or more bridged cortices at the arthrodesis site without signs of hardware breakage or signs of lucency across one or more fusion sites at a mean 8.8 weeks (range 7-10 weeks). This study demonstrated excellent results in regards to postoperative arthrodesis when utilizing an extramedullary implant for hammertoe deformity correction. This device minimizes osseous deficit by extramedullary application, all while augmenting intramedullary K-wire fixation.

Medullary Screw Fixation and the Pilot Hole Technique for the Correction of Hammertoe Deformity.

BACKGROUND: Historically, Kirschner wires have been used for fixation of the interphalangeal joints of the toe. They are still the most popular form of fixation, likely due to training patterns, ease of use, and decreased cost. Recently, numerous medullary fixation devices have become available, including medullary screws. METHODS: After performing various forms of fixation for the correction of toe deformities, the authors have developed a new pilot hole technique for screw fixation advancing on the previously described pilot hole technique for Kirschner wire fixation. RESULTS: The authors have found this method to provide intraoperative confidence that improper hardware placement has not occurred. CONCLUSIONS: The pilot hole technique described in this paper is a safe and effective technique that may be employed by surgeons using screw fixation for the treatment of hammertoe deformities. The technique reduces the possibility of surgeon error and helps to ensure that the screw is properly placed within the phalanges when properly employed.

Intraosseous Technique for Correction of Hammertoe Deformity.

Hammertoe deformities are among the most common conditions treated by foot and ankle surgeons. Many different types of proximal interphalangeal joint arthrodesis fixation techniques have been used. These include implant fixation, absorbable fixation, screw fixation, two-pin fixation, and single-Kirschner wire fixation. Each of these has their own set of associated advantages and disadvantages. One of the most common techniques to address hammertoe deformity is the use of Kirschner wires. Although Kirschner wires have been reliable and produced good outcomes, there are some drawbacks associated with their use. Some disadvantages include wire failure (bending/breaking), infection, and patient anxiety associated with removal. One of the more challenging aspects with using a single Kirschner wire for fixation is stability. Pistoning and rotational instability may occur with single-Kirschner wire use. Both pistoning and lack of rotational control can lead to nonunion, fibrous union, malunion, and ultimately patient dissatisfaction. The suturedesis technique is a surgical option that may be considered when a surgeon attempts to address these disadvantages. The authors believe this technique can adequately bring stability to the frontal plane and eliminate pistoning, which may lead to better fusion rates, better postoperative alignment, and better patient satisfaction. This article outlines the authors' surgical technique of suturedesis in correcting hammertoe deformity.

Associations between changes in loading pattern, deformity, and internal stresses at the foot with hammer toe during walking; a finite element approach.

Over the past decade, Finite Element (FE) modelling has been used as a method to understand the internal stresses within the diabetic foot. Foot deformities such as hammer toe have been associated with increased risk of foot ulcers in diabetic patients. Hence the aim of this study is to investigate the influence of hammer toe deformity on internal stresses during walking. A 3D finite element model of the human foot was constructed based on capturing Magnetic Resonance Imaging (MRI) of a diabetic neuropathic volunteer exhibiting hammer toe. 3D gait measurements and a multi-body musculoskeletal model for the same participant were used to define muscle forces. FE simulations were run at five different instances during the stance phase of gait. Peak plantar pressure and pressure distribution results calculated from the model showed a good agreement with the experimental measurement having less than 11% errors. Maximum von Mises internal stresses in the forefoot hard tissue were observed at the 3rd and 5th metatarsals and 4th proximal phalanx. Moreover, presence of hammer toe deformity was found to shift the location of maximum internal stresses on the soft tissue to the forefoot by changing the location of centre of pressure with internal stress 1.64 times greater than plantar pressure. Hammer toe deformity also showed to reduce the involvement of the first phalanx in internal/external load-bearing during walking. The findings of this study support the association between changes in loading pattern, deformity, and internal stresses in the soft tissue that lead to foot ulceration.

Hallux and Lesser Digits Deformities Associated with Cavus Foot.

It is important to identify the level of the deformity or deformities. It is important to get the limb as close to anatomic alignment as possible. Many levels and multiple procedures may be involved with this reconstruction.

Relative Strengths of Intramedullary K-Wire Techniques for Digital Deformities.

Hammertoe deformity correction surgery is one of the most common procedures performed by foot and ankle surgeons. Recent foot and ankle medical literature presents conflicting opinions regarding the optimal intramedullary fixation device and techniques for use in digital deformity correction. There are a number of varying fixation constructs of intramedullary Kirschner wire fixation reported for proximal interphalangeal joint arthrodesis; however, there are no reports of relative loading strength of the fixations. In this study, 90 sawbone models were divided equally into 3 groups of different intramedullary Kirschner wire fixation techniques: Group A- single straight, Group B- single bent, Group C- double bent. Each fixation construct underwent controlled axial loading and failure points were observed. Results showed no significant difference in load failure from all 3 groups with mean maximum force of Group A = 20N, Group B = 19.1N, and Group C =17.5N. We conclude that all Kirschner wire fixation options for digital deformity correction, will provide similar resistance to sagittal plane axial loads.

Mallet hallux injury: A case report and literature review.

Mallet injury is associated with variable degrees of extensor hallucis longus tendon tearing, ultimately leading to the well-known mallet toe deformity; this entity, commonly described at the lesser toes and fingers, has rarely been reported at the hallux. We present a surgically proven case of mallet hallux injury with radiographic and magnetic resonance imaging assessment and review the literature, including clinical and radiological findings, along with basic treatment concepts.

Impact of crossover second toe on the postoperative outcome of distal chevron osteotomy for moderate to severe hallux valgus.

BACKGROUND: Crossover second toe is often presented in moderate to severe hallux valgus. However, its clinical impact on the postoperative outcome of hallux valgus is still unknown. METHODS: Thirty-five patients who had moderate to severe hallux valgus with crossover second toe were matched with 35 controls who did not have crossover second toe, according to preoperative hallux valgus angle and first-second intermetatarsal angle. Radiological parameters, Foot Function Index (FFI), and Visual Analog Scale (VAS) were assessed as postoperative outcomes at 3, 6, and 12 months after surgery. RESULTS: At 3 months, the FFI in the crossover second toe group was lower than in the control group (p=0.001), while other outcomes were similar. On the other hand, there were no significant differences between the groups at 6 and 12 months, in terms of radiological parameters, FFI, and VAS. CONCLUSIONS: Patients who had moderate to severe hallux valgus with crossover second toe were at risk for slow functional recovery after surgical treatment in the short term, but, in the long-term, there was no difference in overall postoperative outcomes in patients with and without crossover second toe. LEVEL OF EVIDENCE: Level III, retrospective comparative study.

Radiographic and Clinical Comparison of Proximal Interphalangeal Joint Arthrodesis Between a Static and Dynamic Implant.

Hammertoe deformation is a frequent motive for consultation in forefoot surgery, and proximal interphalangeal joint arthrodesis is a classic treatment for fixed deformation, which tends to be achieved more and more thanks to specific implants. This work evaluated and compared clinical improvement, radiologic fusion, and complication rates between dynamic (Difuse®) and static (TinyFix®) implants from Biotech Ortho. A total of 95 patients (110 feet and 166 toes; 97 static and 69 dynamic implants) were included. Mean age was 63.6 (±12.6) years in the dynamic group and 62.3 (±14.01) years in the static group. Epidemiologic and intraoperative radiologic data were collected. Pain, toes deformity, complications, and radiologic findings (bone fusion and osteolysis) were recorded at 4 months postoperatively and at the last follow-up. Mean follow-up was 11.5 (range 4 to 28) months, and the position of the implants was more often satisfying in the dynamic group (p = .01). Fusion rates at 4 months were 67% and 80% in the dynamic and static groups, respectively (p = .05). Radiologic osteolysis occurred more frequently in the dynamic group (p = .05 at 4 months), and pain was still present in 3% in the dynamic group at the last follow-up compared with 7% in the static group. Complication rate was 7% in the dynamic group (implant fractures) and 4% in the static group. Revision was considered more often in the dynamic group (p = .01). The static titanium implant seems superior to the dynamic memory shape implant in Nitinol alloy with regard to fusion (p = .04), complications (p = .03), and revision rates (p = .01). The literature review seems to support the good results of static implants compared with the rest of the available arthrodesis implant solutions.

Clinical Comparison Between Shortening Osteotomy of the Proximal Phalanx Neck and Arthrodesis in Hammer Toe Surgery at Mid-TermFollow-Up.

The treatment of hammer toe has been advocated for years, and many procedures have been proposed with skeletal and soft tissue intervention. The purpose of the present study was to compare arthrodesis of the proximal interphalangeal joint with shortening osteotomy of the proximal phalanx neck. In most cases, both procedures have been associated with elongation of the extensor apparatus, capsulotomy of the metatarsophalangeal joint, and stabilization with a Kirschner wire. To experiment with a technique that respects the anatomy and joint function, we used a distal subtraction osteotomy of the proximal phalanx neck. We compared a series of 78 patients, divided in to 2 groups: 38 (48.7%) treated with arthrodesis and 40 (51.3%) with shortening osteotomy. Patients were aged 22 to 78 years, with a mean final follow-up period of 56.6 (range 24 to 96) months. For clinical evaluation, we used the American Orthopaedic Foot and Ankle Society score, Foot and Ankle Outcome Score, and a subjective rating scale. The results were comparable between the 2 techniques; however, we report faster functional recovery in the group treated with shortening osteotomy (p < .0001), with an adjunctive advantage of preserving the integrity of the proximal interphalangeal joint. Thus, according to our results, this technique is comparable to arthrodesis.

Anatomic Reconstruction Versus Traditional Rebalancing in Lesser Metatarsophalangeal Joint Reconstruction.

Traditional rebalancing techniques, such as capsulotomies and capsulorrhaphies, are commonly performed during complex hammertoe and lesser metatarsal osteotomy procedures involving metatarsophalangeal joint (MTPJ) contractures; however, floating toes, digital instability, and malalignment are concerns. We critically analyzed the outcomes after anatomic reconstruction of the plantar plate and collateral ligaments compared with those after traditional rebalancing techniques. A case-control study was conducted of 54 patients who had undergone surgical correction of lesser MTPJ imbalances due to complex hammertoe deformities (power 80%, type I error = 0.05). Cases were defined as consecutive patients treated with anatomic plantar plate and collateral ligament reconstruction. Controls had undergone traditional lesser MTPJ rebalancing and were matched to cases by age, gender, follow-up duration (minimum 12 months), and concomitant procedures of the same lesser ray. Multivariate logistic regression demonstrated that patients treated with anatomic reconstruction had greater digital stability (negative dorsal drawer and negative paper pull-out test findings) at final follow-up examination compared with the controls. American College of Foot and Ankle Surgeons (ACFAS) forefoot module scores were greater in the anatomic group in all domains (p ≤ .05). Controls had greater postoperative radiographic MTPJ angles than the cases, with no differences detected between the 2 groups in visual analog scale scores or proximal interphalangeal joint angles. The importance of restoration of the plantar plate and collateral ligament integrity as a digital stabilizer is generally accepted but has not been well studied. We found that anatomic reconstruction yielded greater digital stability, greater ACFAS Forefoot module scores, and better radiographic MTPJ alignment than controls. Additional studies are warranted to assess the long-term viability of anatomic lesser MTPJ reconstruction.

Multiplanar Correction of the Lesser Digital Deviation and Indirect Plantar Plate Rupture Repair Using a Braided Polyethylene Nylon Suture: A Technique Guide.

Forefoot and lesser digital pathology continues to be a challenging area of surgical correction for foot and ankle surgeons. Many techniques for the correction of digital deformities secondary to plantar plate rupture, regardless of planal dominance, have been described including direct repair and metatarsal shortening osteotomies for repair. The authors present a new technique for multiplanar correction of deformed lesser digits without direct repair of the plantar plate rupture utilizing a specialty suture. The technique utilizes a braided synthetic polyethylene Nylon suture, which has been traditionally used for open or arthroscopic shoulder labrum repair, for the stabilization of the lesser metatarsophalangeal joint. This novel technique guide for the correction of transverse and sagittal plane deformities of the digit at the metatarsophalangeal joint negates the need for a plantar incisional approach for plantar plate repair or metatarsal head osteotomy from a dorsal approach with augmented stabilization. LEVELS OF EVIDENCE: Level V: Expert opinion.

"Pilot Hole" Technique for Interphalangeal Joint Fusion of Toes.

Fusion of an interphalangeal joint of a lesser toe is a commonly used procedure for addressing interphalangeal joint deformities such as a hammer or a claw toe. Fusion can be achieved by insertion of an intramedullary Kirschner wire in a retrograde manner. Deviation of the Kirschner wire from the intramedullary canal into the surrounding soft tissues is common. This can render the fusion unstable and can cause painful soft-tissue irritation and early Kirschner wire loosening, resulting in an unstable nonunion with recurrence of deformity. We describe a simple and reproducible technique to assist with optimal intramedullary placement of the Kirschner wire, thereby reducing the risk of complications after interphalangeal joint fusion of a toe.

An Unusual Case of Kirschner Wire Migration in the Foot.

We describe a rare case, never before published, of migration of a Kirschner wire used for fusion of the proximal interphalangeal in a lesser toe in a 67-year-old female into the calcaneum. This patient presented to the orthopedic clinic 6 months after elective surgery complaining of pain in her right foot. Radiographs of the foot revealed that the Kirschner wire had migrated toward the calcaneum. Computed tomography of the right foot demonstrated the Kirschner wire within the calcaneum.

Intramedullary Fixation System for the Treatment of Hammertoe Deformity.

Hammertoe is one of the most common foot deformities. Arthrodesis or arthroplasty of the proximal interphalangeal joint using temporary Kirschner wire fixation is the most widespread method of surgical stabilization. However, this type of fixation is associated with some potential complications that can be obviated if percutaneous fixation is avoided. The purpose of the present study was to prospectively collect clinical and radiographic outcomes of operative correction of hammertoe deformity using a permanently implanted 1-piece intramedullary device. A total of 29 patients with 60 painful, rigid hammertoes were prospectively enrolled, clinically and radiographically examined, operatively treated, then followed and re-examined. The outcomes were measured in terms of the American Orthopaedic Foot and Ankle Society lesser toe and visual analog pain scores. After ≥18 months of follow-up, the incidence of fusion with satisfactory radiographic alignment was 85% (51 of 60 toes). One toe (1.67%) developed early postoperative implant failure because of dislocation of the device, there were no cases of infection, and the mean American Orthopaedic Foot and Ankle Society lesser toe score was 87.4 ± 1.3 and the mean visual analog scale pain score was 1.78 ± 0.94. Twenty-five patients (86.21%) stated that they had no symptoms in the involved toes after surgery, and 4 (13.8%) experienced occasional pain, 2 (6.9%) of whom reported limitations of recreational activities and 2 (6.9%) reported persistent swelling without activity limitations. All the patients stated that they would undergo the surgery again if they had the same preoperative condition.

Correction of Hammer Toe Deformity of Lateral Toes With Subtraction Osteotomy of the Proximal Phalanx Neck.

Existing techniques for surgical treatment of hammer toe commonly combine skeletal and soft tissues interventions to obtain a durable correction of the deformity, balance the musculotendinous forces of flexion and extension of the toe, and normalization of the relations between interosseous muscles and metatarsal bones. The most common surgical techniques can provide the correction of the deformity through arthroplasty with resection of the head of the proximal phalanx or arthrodesis of the proximal interphalangeal joint. In most cases, these have been associated with elongation of the extensor apparatus, capsulotomy of the metatarsophalangeal joint, and stabilization with a Kirschner wire. To experiment with a technique that respects the anatomy and joint function, we used a distal subtraction osteotomy of the proximal phalanx neck. We evaluated a series of 40 patients, aged 18 to 82 years, who underwent surgery from January 2008 to December 2010. All patients were evaluated clinically and radiographically pre- and postoperatively and underwent examination at a mean final follow-up point of 24.4 (minimal 12, maximal 36) months. For the clinical evaluation, we used the American Orthopaedic Foot and Ankle Society score. The rate of excellent and good results was >90%. Compared with other techniques, this technique led to considerable correction, restoration of the biomechanical and radiographic parameters, and an adjunctive advantage of preserving the integrity of the proximal interphalangeal joint. Thus, our results have caused us to prefer this technique.

Surgical Treatment Guidelines for Digital Deformity Associated With Intrinsic Muscle Spasticity (Intrinsic Plus Foot) in Adults With Cerebral Palsy.

Intrinsic plus foot deformity has primarily been associated with cerebral palsy and involves spastic contracture of the intrinsic musculature with resultant toe deformities. Digital deformity is caused by a dynamic imbalance between the intrinsic muscles in the foot and extrinsic muscles in the lower leg. Spastic contracture of the toes frequently involves curling under of the lesser digits or contracture of the hallux into valgus or plantarflexion deformity. Patients often present with associated pressure ulcers, deformed toenails, shoe or brace fitting challenges, and pain with ambulation or transfers. Four different patterns of intrinsic plus foot deformity have been observed by the authors that likely relate to the different patterns of muscle involvement. Case examples are provided of the 4 patterns of intrinsic plus foot deformity observed, including global intrinsic plus lesser toe deformity, isolated intrinsic plus lesser toe deformity, intrinsic plus hallux valgus deformity, and intrinsic plus hallux flexus deformity. These case examples are presented to demonstrate each type of deformity and our approach for surgical management according to the contracture pattern. The surgical approach has typically involved tenotomy, capsulotomy, or isolated joint fusion. The main goals of surgical treatment are to relieve pain and reduce pressure points through digital realignment in an effort to decrease the risk of pressure sores and allow more effective bracing to ultimately improve the patient's mobility.